Synchronous belt with synchronous pulley it is to replace the traditional triangle belt with a V pulley and chain with sprocket transmission inevitable products, synchronous belt with synchronous pulley transmission is tooth and tooth hold together for precision cooperation, no sliding gap, transmission is smooth, with accurate transmission ratio, but also shock absorption, low noise, to achieve the accurate automation control, transmission ratio range, can reach 1:10 but also can achieve the second level of transmission, the application is flexible. Allow line speed up to 40m / s, 5000-1000 / min turn (individual tooth type, such as 5GT, 8YU), high transmission efficiency, generally up to 98% -99%, the transfer of power from a few watts to hundreds of kilowatts, small tension, no lubrication, non-polluting, easy to replace, and the same time, in the current market after the basic localization of the PU (polyurethane) synchronous belts, the use of a wider range of applications, especially in the ceramic and glass industry.
Square tooth synchronous belt is divided into: the lightest MXL, ultra-light XXL (the current market has not been widely used), special light XL, light L, heavy H, special heavy XH, ultra-heavy XXH, a total of seven, these are the widely used in the current market.
Special tooth-type synchronous belt is divided into: the lightest T2.5, light T5, heavy T10, the heaviest T20, now on the market, and AT5, AT10, and AT20, many engineers will ask about the difference between these models and non-AT ah, AT-type tooth type and T-type difference in the bottom of the arc teeth, while the T-type for the full trapezoidal teeth, relative to the transmission of the AT will be more precise a little bit of transmission clearance, of course, the noise will be smaller. The noise will also be smaller.
Full arc tooth synchronous belt: HTD3M, HTD5M, HTD8M, HTD14M, HTD20M, arc tooth synchronous belt drive high precision, low noise.
Half arc tooth synchronous belt: half arc tooth synchronous belt, also known as high torque synchronous belt, models have, S2M, S3M, S4.5M, S5M, S8M, S14M, this type of synchronous belt is high torque synchronous high precision synchronous belt, of course, the production of high precision, the price is relatively expensive.
Precision arc tooth synchronous belt: 1.5GT, 2GT, 3GT, 5GT these kinds of synchronous belts at present domestic manufacturers or very few, mainly imported, the market is not, generally used for high-precision transmission, and imported equipment is common, this type of belt is generally used in automation control equipment.
8YU synchronous belt: also the semi-circular arc tooth synchronous belt, suitable for high-speed transmission, high torque, transmission speed up to 1000rpm/min, generally used in medical equipment.
Modified arc tooth synchronous belt: RPP5M, RPP8M tooth type is rabbit tooth type, good turning effect, suitable for high-speed transmission. Generally used in robotic equipment.
中文简体
